|
**No Evaluation Fees / No Attempt Fees** Free evaluation and free external hard drive with every successfull recovery. You pay nothing unless your data is recoverable. Call now for a free quote: 1-800-717-8974. |
RAID Data Recovery Prevention
By James Allen
If you have spent the time to increase your computer's performance by
setting up a hardware RAID array, you owe it to yourself to invest a little
extra time and effort in maintaining the hard disks in your setup. Following
these tips will help limit the need for data disaster recovery in the
future.
1. If you are copying information from an old harddrive onto those being
used in your array, be sure to keep the old disk around for a while. That
way, if you discover any faults or errors in your raid array, you will
still have your original data to work with.
2. Make sure you choose the raid level that works best for your needs.
If you are just in need of faster reads and basic redundancy, RAID Level
1 may be your ticket. This basic level Redundant Array of Inexpensive
Disks ensures against data loss by incorporating 2 drives - one mirroring
the other. Although the cost per megabyte is higher, the increase in speed
and protection against data loss are well worth it.
3. If you are setting up a multi-user enviroment, creating a 3 or 5 drive
RAID-5 array may be your best choice for speed and data protection. Keep
in mind though, if your requirements are write performance sensitive,
there are better alternatives.
4. If you are trying to decide between a software based or hardware based
RAID array, remember, hardware based arrays do not require software to
boot, have the logic within them and as such are much more fault tolerant.
Stick with a hardware array if you are concerned about disaster recovery
planning!
5. Despite the increase in speed and performance using RAID arrays, files
can still become disorganized and corrupted. Be sure to run your preferred
software for scanning and checking your disks on a regular basis.
If you think taking the extra time to follow these tips and care for
your RAID array sounds tedious, take a few moments to check out the cost
of raid data disaster recovery. That alone should make you realize that
your efforts are not in vain!
James B. Allen blogs regularly about disaster recovery planning. To learn
more about data recovery and other aspects of disaster recovery, visit
James at: DisasterRecoveryData.com
Article Source: http://EzineArticles.com/?expert=James_Allen
|
**No Evaluation Fees / No Attempt Fees** Call now for a free quote: 1-800-717-8974. For over a decade we have been dedicated to recovering data for clients across the globe.
|
|
